MATRIX TECHNOLOGY INC.
6
Menu operation
On / off operation
4.1 Keyboard arrangement
Key description
Key position
Function description
0-9
：
Numeric keys
Local (numeric key “7”):
Local operation (effective if pressed with shift at the same time,
disconnected from the computer)
Battery (numeric key “8”):
Early warning function of battery charging, and setting of the
higher and lower limits of current (effective if pressed with shift at
the same time)
Crl (function key “Save”):
Clear key (to clear the error value when the setting is wrong, and it
is effective if pressed with shift at the same time)
I-Set
Set the maximum output current of power supply
V-Set
Set the output voltage of power supply
Save
Store the current related parameters of power supply on the
designated storage positions
Recall
Recall related setting parameters of power supply from the
designated storage position
Shift
Composite key, used in combination with multifunctional key
On/off
Control the output state of power supply
▲
Page up key (select menu in operation, and increase output voltage
at the interface)
▼
Page down key (select menu in menu operation, and decrease
output voltage at the interface)
Enter
Confirmation key
knob
Used to change the setting of voltage and current of power supply
4.2 Introduction to operation of front and rear panels
Before using the power supply, please understand the following basic introduction to the key
operation of front panel.
●
After the power is on, the power supply shows panel operating mode automatically. Under the
panel operating mode, all keys can be used.
●
When the power supply is remote operating mode, the keys on panel do not work. The panel
operating mode and remote operating mode only can be controlled for switch through PC machine.
When the operating mode changes, the output parameters of power supply will not be affected.
●
You can control the output On/Off of power supply by pressing the key on the front panel.
●
LED can display the current operating state of power supply. When opening the power supply,
LED will show two data, the first one shows voltage value, while the second one shows current value.
Multifunctional key
Functional key
