Matrix MD721, Manual For Installation, Use And Maintenance, Page: 12 / 24

12
Care and Maintenance
IMPORTANT
Before any maintenance is started, the appliance must be
disconnected from the power supply.
If the oven has been in use, let the oven cavity and the heating
elements cool down before attempting any maintenance.
The oven exterior
As the oven has a stainless steel or enamel surface, you should
use a nonabrasive cleaner. Any abrasive cleaner (including Cif) will
scratch the surface and could erase the control panel markings.
Stainless steel can be effectively cleaned by simply using a dilute
solution of water and mild detergent and drying to a shine with a
clean cloth.
Proprietary stainless steel cleaners are available. We recommend the
a clean, dry microfibre cloth for cleaning stainless steel surfaces as
this has been designed to prolong the finish of your appliance.
The oven interior
The oven should always be cleaned after use when it has cooled
down.
The cavity should be cleaned using a mild detergent solution and
warm water.
Suitable proprietary chemical cleaners may be used after first
consulting with the manufacturers’ recommendations and testing a
sample on a small area of the oven cavity. Abrasive cleaning agents
or scouring pads/cloths should not be used on the cavity surface.