Matrix MD721, Manual For Installation, Use And Maintenance, Page: 11 / 24

11
• Then touch or to select the required end of cooking time.
When the correct time shows on the display, wait for approximately
five seconds. The cooking time and end of cooking time indicators
will remain lit to confirm the automatic programme is on.
• Select the oven function and temperature.
• The oven will not switch on until the automatic programme starts.
• When the cooking time is complete, there will be an alert beep
which will continue for two minutes and the end of cooking time
indicator will flash. To switch off the alert beep, touch any key.
• Turn the control knobs to the off position.
Please note :
At the end of a programme, once the acoustic signal has finished,
the oven will remain off. However if you press a key the oven will revert
to the function and temperature that the control knobs were set to.
Remember to turn off the oven manually.
It is also possible to set just an end of cooking time. This will act like a
semi-automatic cooking programme.