Matrix Vision mvBlueFOX, Technical Manual, Page: 161 / 255

154 CONTENTS
You can change the gain via wxPropView (p. 77) like the following way:
1. Click on "Setting -
>
Base -
>
Camera" . There you can find
(a) "AutoGainControl" and
(b) "AutoExposeControl" .
Figure 5: wxPropView: Setting -
>
Base -
>
Camera
You can turn them "On" or "Off" . Using the auto controls you can set limits of the auto control; without you
can set the exact value.
After gamma correction, the image will look like this:
MATRIX VISION GmbH