Matrix Switch Corporation MSC-XD0816L Product Manual Download

Page: 3 / 61

MSC-XD0816L Product Manual

Table 1: Document Revision History

Revision & Date

Changes

Revision 1.8

2018-11-01

•

Added MSC-FS44BFL, MSC-FS44FBL, and MSC-FS44FL SFP SDI routers.

•

Added MSC-XV1664, MSC-XV3232L, MSC-XV3232S, MSC-XV3248, MSC-

XV4832, and MSC-XV6416 routers.

Revision 1.7

2018-02-20

•

Added MSC-UXD 12G-SDI systems

•

Updates to SDI specifications

•

Other minor changes

Revision 1.6

2017-03-07

•

Added MSC-HDV88+DC systems.

•

Increased Storage and Operating temperature specifications.

Revision 1.5

2016-11-18

•

Corrected

External Button Control Pinout

pin diagram for MSC-HD41L,

MSC-HD22L, and MSC-HD42L systems.

Revision 1.4

2016-08-01

•

Mascot protocol updated to 3.0 with System Parameter commands, Matrix
I/O mapping commands, and Panel/GPIO commands.

•

Improved Software Update documentation.

•

Added pinouts for RS-232 and RS-485 serial port and GPIO Auxiliary

interface.

•

Added XD series systems.

Revision 1.3

2016-05-17

•

Added MSC-CP59X59E panel.

Revision 1.2

2015-08-20

•

Added protocol commands: MtxGroup, PanelDis, and PanelExtEn.

•

Updated Mascot protocol information to version 2.4.

•

New manuals for MSC-V1616(LS)(+DC), MSC-1HD1616(LS)(+DC)

Revision 1.1

2014-06-24

•

Updated External Button Control Pinout section.

•

Added External Button Control information for MSC-HD42L.

2014-03-17

•

Fixed some document cross references.

•

Minor text content and figure position changes.

2013-11-29

•

MSC-4HDX6464 manual released.

•

Updated Mascot protocol information to version 2.3.

•

Added Vars Mascot command description.

Revision 1.0

2013-04-15

•

Initial release of modular product manual.

Page 3 of 61

www.matrixswitch

corp.com

Summary of Contents for MSC-XD0816L






























































Search results

Summary of Contents for MSC-XD0816L

Reviews:

Related manuals for MSC-XD0816L

Brands by name

Popular brands

Matrix Switch Corporation MSC-XD0816L, Product Manual

Search results

Summary of Contents for MSC-XD0816L

Reviews:

Related manuals for MSC-XD0816L

Brands by name

Popular brands