MSC-HD42L Product Manual
3.27 PAdd Command
Routers and MSC-GCP2U32 only
Preset add command. Adds a connection to a preset. This can be used to incrementally create a preset without
changing the active matrix routing. 0 can be used for SRC for Mute (if supported). This command stores preset
information which is retained and available through system power cycles.
Command
Description
PAdd PRESET, DEST, SRC
Add a connection of SRC to DEST on PRESET for all levels.
PAdd PRESET, DEST, SRC, LEVEL
Add a connection of SRC to DEST/LEVEL on PRESET.
Example
>PAdd 1,2,3
>PAdd 1,3,0,2
>
The first command adds a connection from Source 3 to Destination 2 on Preset 1. The second command Mutes
Destination 3/Level 2 on Preset 1.
3.28 PairIO Command
Routers only - Protocol Version: 2.1
NOTE: Superseded by MtxGroup command.
I/O pairing is used for pairing destinations/sources for 3D support. When activated a router will appear to have
half the number of physical destinations and sources. A given matrix crosspoint change will cause 2
destinations to be changed. Each odd destination/source is paired with the next highest even number
destination/source. This option is stored and recalled on power on. When enabling this feature on a 4x4 video
router for example, it would appear as a 2x2 3D router where destination 1 & 2 are paired and 3 & 4 are paired,
likewise for sources. This setting is stored and recalled on power up.
Command
Description
PairIO
Query current value of I/O pairing configuration.
PairIO 0 | 1
Enable or disable I/O pairing (0: disable, 1: enable)
Example
>PairIO
0
>PairIO 1
>
The first command queries the current state of I/O pairing, the second enables it.
3.29 PanelOfs Command
Carina series only - Protocol Version: 2.1
Page 34 of 55
Copyright © 2013-2015 Matrix Switch Corporation
