6
3.1 RECOMMENDED CLEANING TIPS
CHAPTER 3: PREVENTIVE MAINTENANCE
MAINTENANCE SCHEDULE
E
ACTION
FREQUENCY
Clean the indoor cycle using soft cloths or paper towels or other Matrix approved
solution (cleaning agents should be alcohol and ammonia free). Disinfect the saddle
and handlebars and wipe off all bodily residues.
AFTER EACH USE
Make sure that the indoor cycle is level and does not rock.
DAILY
Clean entire machine using water and a mild soap or other Matrix approved solution
(cleaning agents should be alcohol and ammonia free).
Clean all exterior parts, the steel frame, front and rear stabilizers, seat and handlebars.
WEEKLY
Test the emergency brake to make sure it is functioning properly. To do this, press down
the red emergency brake lever while pedalling. When functioning properly, it should
immediatly slow down the flywheel until it comes to a complete stop.
BI-WEEKLY
Lubricate the saddle post (A). To do this, raise the saddle post to the MAX position,
spray with maintenance spray and rub down the entire exterior surfaces with a soft
cloth. Clean the saddle slide (B) with a soft cloth and if necessary apply a small amount
of lithium/silicone grease.
BI-WEEKLY
Lubricate the handlebar post (C). To do this, raise the handlebar post to the MAX
position, spray with maintenance spray and rub down the entire exterior surfaces with a
soft cloth. Clean the handlebar slide (D) with a soft cloth and if necessary apply a small
amount of lithium/silicone grease.
BI-WEEKLY
Inspect all assembly bolts and pedals on the machine for proper tightness.
5 mm
MONTHLY
B
A
D
C
MAINTENANCE
1. Any and all part removal or replacement must be
performed by a qualified service technician.
2. DO NOT use any equipment that is damaged and or
has worn or broken parts. Use only replacement parts
supplied by your country’s local MATRIX dealer.
3. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels
for any reason. They contain important information. If unreadable
or missing, contact your MATRIX dealer for a replacement.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance
is the key to smooth operating equipment as well
as keeping your liability to a minimum. Equipment
needs to be inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing
maintenance or repair of any kind is qualified to do so.
MATRIX dealers will provide service and maintenance
training at our corporate facility upon request.
