Matrix Fitness C5X-01, Service Manual

Page: 49 / 73

46
9.9 STAIR REPLACEMENT - CONTINUED
7) Remove the axle from the lower side of the stairs needing to be replaced following the same procedure as Steps 5-6.
8) Remove the stair set when you have removed both axles (Figure E).
9) Remove the E-shaped clip from the short axle between the 2 portions of the stair set (Figure F). This will allow you to separate the 2 portions
of the stair set.
10) Reverse Steps 1-9 to install a new stair set.
11) Turn the brake bar to the right to unlock the stairs once the replacement is finished.
12) Test the Climb Mill for function as outlined in Section 9.20.
FIGURE F FIGURE E
CHAPTER 9: PART REPLACEMENT GUIDE