7
BEFORE YOU START:
If you intend to rack mount your GT series amplifier you may want to
consider removing the rubber feet from the amplifier to allow maximum
room for other units that may share the rack space. This is a simple
process. Using a small flat bladed screwdriver gently prise the shiny plastic
insert up from the chassis which will enable the feet to be removed. Store
somewhere safe!!
To replace the feet simply pull the plastic insert so the mechanism is closed,
line up the foot with the chassis hole and push into place.
1
2
3
4
1
2
3
(9) Power Connection
Mains power is supplied to the amplifier by a standard 10 Amp IEC
mains socket.
An appropriate mains lead is supplied with the amplifier.
Note:
The amplifier requires a stable power supply to function
as intended. Ensure that the power source (mains power
supply, generator, etc.) is suitable for this application and
adequate power is available. Poorly selected power sources
result in sub-optimal performance, increased likelihood of
tripping breakers, blowing fuses and in extreme situations
damage to equipment may occur.
Summary of Contents for GT1000fX
Page 23: ...22 NOTES...
