Matrix Elements GT1000fX, User Manual

Page: 14 / 24

SIGNAL SIGNAL
A B
POWER
on
CHANNEL LEVELS
GT FX
POWER AMPLIFIER
MATRIX
ON
PROTECT
BRIDGE MONO
Main Mono/L Out to
Input A on Matrix Amp
*Could also be run as
Stereo!!
Matrix mode
switch set to
Parallel
* or stereo if a
stereo feed is
given to the amp
Ensure the total
combined load for the
daisy chained cabs
does not exceed 4
ohms per channel
More Complex Systems with Mismatched Loads or Daisy Chained Cabs
This cab could be 8 ohms
and the bottom cab could
be 16 ohms giving a
combined impedance of 5.3
ohms total.
R total = (R1xR2) / (R1+R2)
so in this case:
(8 x 16) = 128
(8 + 16) = 24 = 5.3
Two 16 ohm cabs
giving a combined
impedance of 8 ohms
Note: Depending on your
modelling system you can also
run hybrid systems from each
channel of the amp comprising
traditional guitar cabinets and
FRFR systems for maximum
realism and tonal possibilities.
SIGNAL SIGNAL
A B
POWER
on
CHANNEL LEVELS
GT FX
POWER AMPLIFIER
MATRIX
ON
PROTECT
BRIDGE MONO
Multiple Modellers Sharing One Amp
Matrix mode switch
set to Stereo
Modeller 1 uses Input A whilst
Modeller 2 uses Input B
Modeller 1 uses Output A to mono cab
Modeller 2 uses Output B to mono cab
13