background image

 

Connect Antenna(s) to the Ruggedized Reader 

Attach your antenna(s) to the Ruggedized Reader in order (1, 2, 3, 5, 6, 7, 8, Rx

1

, and then Rx

2

), and 

remove them in reverse order.   

1.  Attach the straight SMA end of the antenna connector cables to the SMA connector on the back 

of the antennas. 

NOTE:

 Make sure that the straight SMA end of the cables connect to the 

antennas, and the right angle SMA end of the cables connect to the 
Ruggedized Reader. 

2.  Attach the right angle SMA end of the antenna connector cables to the corresponding connectors 

on the Reader. 

3.  Use an SMA wrench to carefully tighten the cable connection. 

CAUTION:

 Do not over-tighten the cable connection, because you may 

damage the connectors. 

4.  Secure your cables using wire ties (do not bend the cables.) 

WARNING:

 Do not disconnect antenna cables when actively reading 

tags (if the LED is lit on the Reader, don’t disconnect the antenna 
cables.) You could severely damage your Reader. Make sure that you 
unplug the power supply (or power off the clamp truck) to power off the 
system first before disconnecting cables. 

Connect the Reader to a Host Computer 

The steps you must follow to interface the Ruggedized Reader with your system depend upon the 
software package you choose to use. Contact Matrics for more information. 

Power On (and Off) the Reader 

In the Clamp Truck application, the Ruggedized Reader is powered by a 48VDC power supply from 
Matrics mounted on the clamp truck, with on-board power filtering and regulation to accommodate 
gas and electric lift devices and associated noise/voltage variation. Refer to the 

Clamp Truck 

Application User’s Manual

 (DCN: MNI03H003) for more information about this application. 

In the Reader Station application, the Ruggedized Reader is powered through the Reader Station from 
Matrics (PN: RDR-STA-100). Refer to the 

Reader Station User’s Manual

 (DCN: MNI03H002) for 

more information about the Reader Station. Refer to the 

Reader Station Application User’s Manual

 

(DCN: MNI03H004) for more information about this application.  

8

 

Ruggedized Reader User’s Manual 

 

2003 Matrics, Inc.

 

Summary of Contents for RDR-RUG-100

















Reviews: