Change factory settings
page 9/20
9. Change factory settings
Each meter is calibrated at the factory for use with motor oil (See change scale factor, page 8).
The unit of measure is also selected prior to shipment.
9.1 Programming
To change the factory settings:
1. Push and hold at the same time the and
buttons.
2. PrG will appear on the display.
3. Release the and buttons.
4. Then press and release in order the
and the buttons.
5. The current unit of measure will now be flashing indi-
cating that you have entered the programming mode.
9.2 Change unit for measure
The meter comes with an option to choose 4 different units of measure.
1. The actual unit of measure is flashing when the
pogramming mode is entered.
2. Press the button to toggle between the four
options; PT, QT, GAL, L.
3. When the desired unit of measure is displayed, press
the button. The unit of measure icon stops
flashing.
4. If L, (liters), is selected, the decimal point begins to flash.
• You now have the option to change the decimal point to either a period or a comma.
• To do this, press the button.
5. If no scale factor changes are necessary, go to save changes on page 8.
Changing the unit of measurement from metric to english or from english to metric clears
the re-settable total and accumulated total.
Unit of
measurement
Programming display
Scale factor digits
