Operation
Page 27
4.2
Adjusting the mower
Attention!
For a correct cut you must set the mower correctly. The important thing
in this regard is that the mower must be lower in the front than it is in the
rear.
&
Note!
See the operating manual from John Deere on information concerning
adjustment of the mower.
The adjustment is executed on the front mower arms in the same manner that it is
executed for the original mower attachment.
4.3
PTO drive shaft
You can switch the front PTO shaft on and off via the PTO shaft switch on the tractor.
Fig 35: Cover PTO shaft stub
Remove the protective cap on the PTO shaft stub before coupling a front implement
that is powered by the PTO shaft.
Fit the protective cap onto the PTO shaft stub, after you have uncoupled the front im-
plement.
