Installation
Page 22 of 37
device is sealed with a plug. If the tractor has a 2nd Control device, this is how the elbow in the
gearbox must be replaced by the provided L-connection.
1.
Mount the provided L-threaded fitting on the gearbox. If your tractor has a 2nd
control device then mount the pressureless return of the control device on the L-
threaded fitting, otherwise seal the connection with the provided plug.
Fig. 29: Mounting the pressureless return on the gearbox
2.
Mount the hydraulic hose on the L-connection.
Fig. 30: Lay out the pressureless return
3.
Lay the hose under the vehicle to the front.
