Installation
Page 11 of 37
4.1.2
Installation of the hydraulic system
1.
Screw the straight screw fitting G1/4"-8L into the cylinder connections.
2.
Mount the cylinders on the front power system. For the bolts with heads, ensure that
the bolts are inserted from the inside and that the spring cotter pin is outside.
Fig. 6: Hook-in cylinders
3.
Mount the holder for the hydraulic hoses on the right side of the tractor frame in the
direction of travel.
Fig. 7: Hydraulic holder on left side of the tractor frame in the direction of travel
4.
Screw the bulkhead fitting with straight connection and the straight screw connection
¼"-8L into the throttle.
5.
Connect the throttle to the ball valve with an adjustable 8L elbow union.
6.
Mount the pre-assembled components on the tractor.
7.
Mount the second bulkhead fitting as shown.
8.
Mount the two L-threaded fittings on the bulkhead fittings.
Bulkhead fitting
L- threaded fitting
adjustable elbows
