EC Declaration of Conformity
Page 8
Fig. 3 The front power system is prepared for use of the front sweeper.
4.
Pull the spring cotter pin out of the lift limiter.
5.
Flip up the lift limiter.
6.
Secure the lift limiter with the spring cotter pin.
Instructions for shortening and mounting the universal joint shaft
4.1.1
Shortening the universal joint shaft
1.
Pull the two halves of the universal joint shaft apart.
2.
Mount one end of the universal joint shaft on the tractor frame.
3.
Mount the other end of the universal joint shaft on the implement.
Fig. 4 In the shortest work position, mark the piece that will be sawn off on one half of the
universal joint shaft.
