EC Declaration of Conformity
Page 22
Dimensions
Data
Working width
1400 mm
Sweeper roller diameter
350 mm
Sweeper roller speed
Single-stage, depending on the engine rpm
Distance in front of the axle with-
out accessories
Approx. 1180 mm in straight work position
approx. 1400 mm in the pivoted working position
Weight without accessories
Approx. 72 kg
9.2
Accessories and spare parts
Accessories/spare part
Order number
Refuse collector
theoretical volume approx. 70 l
Empty weight approx. 21 kg
131 7503
Splash guard
131 7504
10
List of illustrations
Fig. 1 Lift limiter for cylinder ..................................................................................................................... 7
Fig. 2 Lift limiter mounted on the cylinder bolt ........................................................................................... 7
Fig. 3 The front power system is prepared for use of the front sweeper. ................................................... 8
Fig. 4 In the shortest work position, mark the piece that will be sawn off on one half of the universal joint
shaft. ......................................................................................................................................... 8
Fig. 5 Cut off the universal joint shaft........................................................................................................ 9
Fig. 6 Saw off the profile tube ................................................................................................................... 9
Fig. 7 Debur all sawn edges ................................................................................................................... 10
Fig. 8 Grease the profile tubes ............................................................................................................... 10
Fig. 9 Slightly move the universal joint shaft back and forth .................................................................... 11
Fig. 10 Attach the front sweeper ............................................................................................................. 12
Fig. 11 Front sweeper hooked in ............................................................................................................ 12
Fig. 12 Lift limiter flipped down ............................................................................................................... 13
Fig. 13 Preparations on the front sweeper .............................................................................................. 14
Fig. 14 Hooking in the refuse container .................................................................................................. 14
Fig. 15 Refuse container mounted.......................................................................................................... 15
Fig. 16 Control levers ............................................................................................................................. 16
Fig. 17 Emptying the refuse container .................................................................................................... 17
Fig. 18 Adjusting the wheel height .......................................................................................................... 18
Fig. 19 Sweeper roller ............................................................................................................................ 19
Fig. 20 Tension ring ............................................................................................................................... 19
Fig. 21 Cover plate removed .................................................................................................................. 20
Fig. 22 Adjusting the belt ........................................................................................................................ 20
