List of illustrations
Page 19
The following tasks must be executed on both sides of the sweeper roller.
Fig. 19 Sweeper roller
5.
Unscrew the grub screw on the bearing tension ring.
Fig. 20 Tension ring
6.
Detach the tension ring through a light blow (with drift punch) counter-clockwise.
7.
Remove the fastening screws of the side bearing.
8.
Remove the side bearing.
9.
Remove bearing sleeve from the threaded rod.
10. Pull off the sweeper roller from the side.
11. Fit on the new sweeper roller.
Fastening
screws
Bearing tension ring
Drift punch
Tension ring
