Matermacc Irrigamatic P350, Manual For Use And Maintenance

Page: 9 / 28

REV 0/00
Pag.06
8. PROGRAMMING
We recommend to program at the end of the start-up phase and before pressing key to start the
working cycle.
However the set values can also be modified while executing the working cycle, always by following
the same input procedure
START
8.1 PROGRAMMING THE WORKING CYCLE
NOTE
The values that were modified when the working cycle is in process (IRR)
are not stored in memory when the electronic console is being switched off.
When switching up next, the values being displayed will be the ones set during
the previous programming phase.
The time can be set up to max. 23h and 59' from the time displayed by the clock.
Press key . The time is the same displayed by the clock.
(For ex. 12:30)
Press key without releasing it and then press keys or
to set the required minutes.
Press key to turn the arrow to the left.
8.1.1 PROGRAMMING THE IRRIGATION START TIME .
1 Recall the irrigation start time.
2 Set the required irrigation start time.
Set the minutes.
Set the hour.
(Only if required)
Press key without releasing it and then press keys or
to set the required hour.
PRO
GRAM
PRO
GRAM
PRO
GRAM
PRO
GRAM
NOTA NOTE
The irrigation start time in memory when the eletronic console is switched off is not stored