REV 0/00
Pag.15
11.3 END-OF-IRRIGATION TIME LIMIT
This function allows to establish the time within which irrigation should be ended.
For this reason, it is important to set all programming values correctly.
If the end-of-irrigation limit time is programmed in different way, this function can be used in
two ways. In particular:
In this case, in case of interruptions during the working cycle
The limit time should be reached before the expected end-of-irrigation time.
A
B
By programming the limit time equal to the expected end of irrigation time.
By programming a time limit different than the expected end-of-irrigation
Any considerations concerning the application of this function should be related
to the indication of the end-of-irrigation time, displayed by pressing key
(see par. 8.3 page 10).
(for ex. because there is not enough pressure) the console would automatically guarantee
the arrival time established by recalculating the programming values in view of the time that
is still available.
The console would calculate the new programming values automatically.
(initial pause, final pause, rewinding speed).
h
11.3.1 PROGRAMMING EXAMPLE OF END-OF-IRRIGATION TIME LIMIT
1
Enabling the limit time function.
2
Set the time (for ex. 6:10).
Set the minutes.
Set the hour.
3
Disabling the limit time function.
If the " Err Hc " message is displayed, the function end-of-irrigation
time limit won't be accepted.
This example refers to the values used in par. 8.3 of page 10.
Press keys
and
at the same time.
The limit time is the same displayed by the clock.
Press key
without releasing it and then press keys
or
to
set the required minutes.
Press key
to turn the arrow to the left.
Press key
without releasing it, and then press keys
or
to set the required hour.
Press keys
and
and
at the same time until the time displayed
becomes the same as the time displayed by the clock.
(Only if required)
PRO
GRAM
PRO
GRAM
h
PRO
GRAM
PRO
GRAM
PRO
GRAM
PRO
GRAM
PRO
GRAM
PRO
GRAM
Summary of Contents for Irrigamatic P350
Page 2: ......
