REV 0/00
Pag.10
8.3 DISPLAYING THE EXPECTED END-OF-IRRIGATION TIME
Press key
to know when the end-of-irrigation is expected.
Present time
10:34
Irrigation start time
12:30
Initial pause
Rewinding speed
20m/h
Unwound meters
350m
Final pause
The expected end-of-irrigation time is given by:
Irrigation start time
Total irrigation time
E
Press key
.
The time is displayed as
where
indicates the calculated time.
If the total irrigation time exceeds 24 hours, the console will display
the message
( See paragraph 13.2
page 19).
8.3.1 CALCULATION EXAMPLE OF
END-OF-IRRIGATION TIME
1
Programming values
Total irrigation time
2
How to calculate the time
nd-of-irrigation time
3
Displaying the expected end-of-irrigation time
" 6c10 "
"c"
" Err Hc "
This time is calculated by the console by adding up the initial pause, the final pause
and the time needed to carry out the cycle, based on the unwound meters and on
the rewinding speed that has been programmed.
For this reason the time is displayed with a "z" between hours and
minutes to indicate the calculated time with end-of-unwinding advising.
8.3.2 END-OF-IRRIGATION TIME WITH END-OF-UNWINDING ADVISING
(See par. 11.1 page 14)
If key
is pressed after enabling the function "end-of-unwinding advising"
is possible to know before starting unwinding, the expected
time, calculated based on the meters set to get the advising (for ex. 300m).
h
h
17h : 30' +
5' =
5' +
17h : 40'
12 : 30
+
17h : 40' =
6 : 10
h
Summary of Contents for Irrigamatic P350
Page 2: ......
