Dimensions in Inches(millimeters) mate.com
Mate Precision Technologies • 1295 Lund Boulevard • Anoka, Minnesota 55303 USA • Phone +1.763.421.0230 • 800.328.4492 • Fax +1.763.421.0285 • 800.541.0285
The Mate Logo is a registered trademark of Mate Precision Technologies Inc.
© Mate Precison Technologies Inc.
LIT01233 Rev B
MATE 2-PIN LINE UP TOOL
USAGE INSTRUCTIONS
Step 13b
Step 13a
14. Disengage turret locking pins.
15a. Rotate machine to the tool change position
and tighten all
upper
flange bolts to a torque
of 40 N-m, 29.5 ft-lbf or 354 in-lbf.
15b. Rotate machine to the tool change position
and tighten all
lower
flange bolts to a torque
of 40 N-m, 29.5 ft-lbf or 354 in-lbf.
ALIGNMENT PROCEDURE (CONT.)
Steps 15b
Steps 15a
12. Remove the Alignment Bar while still at the active punching station.
13a. Lift up the Alignment Punch while sliding in a piece
of metal on top of Die or Die Carrier and under the
Alignment Punch to disengage tools.
WARNING:
It is very important that the tools are NOT
engaged when rotating the turret. Damage to the
Alignment Tool and/or turret is possible.
13b. Lower alignment punch to rest on piece of metal.
Step 12
