SAFETY INSTRUCTIONS
CARE AND MAINTENANCE
ALWAYS USE EYE PROTECTION
WHILE USING HAND TOOLS
PRODUCT DETAILS
Page 3
3/8" DRIVE SPLIT BEAM 20-100 FT. LBS.
FLEX HEAD TORQUE WRENCH
•
The torque wrench may only be used for the
controlled tightening of screws and nuts.
• The torque wrench is a measuring/testing
instrument and they must not be used to loosen
screw connections.
• Function direction:
the torque wrench can only be
operated clockwise to measure torque
(according to the marking on the torque wrench).
• Never use torque wrench to break loose fasteners.
• Never use torque wrench as a lever bar.
• Use of damaged hand tools, sockets,
extensions and accessories may result in injury.
• Do not use torque wrench as a hammer.
• Torque wrenches not in calibration
may cause damage to parts or tools.
• Do not use extensions on handle as
damage to torque wrench will result.
• Over tightening of fasteners may
result in breakage.
• Handle is not insulated, do not use on live
electrical or high voltage circuits.
1. This torque wrench is a precision tool, it should be
handled and stored with care. Do not hammer
with or use as a breaker bar.
2. The torque wrench is lubricated for life and should
not be oiled. The only exception is the ratchet head
which may be lubricated as needed
for smooth operation.
3. The torque wrench is precision measuring
instrument. Calibration must be done regularly to
ensure accuracy and it’s the owner’s responsibility.
Suggested calibration period is at least every
12 months or even shorter depending on situation.
4. Always store the torque wrench in the box after
use to keep away from dirt and humidity.
5. Never disassemble the torque wrench by yourself.
For any need to disassemble the torque wrench or
repair it, please look for assistance from qualified
service station. Any incorrect action to disassemble
the torque wrench may result in
damage to this instrument.
6. Setting the torque value to the lowest scale
value after use.
7. The calibration of the torque wrench may
only be carried out by an authorized
laboratory or workshop.
RATCHET HEAD
(Part #TSBC250FRK for Ratchet Head Repair Kit)
TORQUE SCALE
LOCK & UNLOCK LATCH
RUBBER GRIP
WARINING
RISK OF FLYING PARTICLES
TSB100F
2011247-14
