![background image](http://html.mh-extra.com/html/matco-tools/mt1425k/mt1425k_manual_1739882001.webp)
DO NOT DISCARD – GIVE TO USER
WARNING
Page 1
Study, understand and follow all instructions provided with this
product. Read these instructions carefully before installing,
operating, servicing or repairing this tool. Keep these instructions
in a safe accessible place.
ADHESIVE REMOVAL SYSTEM
SPECIFICATIONS:
Disc Capacity : 4"
Free Speed :
Low - 2,000 RPM /
High - 4,000 RPM
Overall Length : 7-3/4" (197mm)
Net Weight : 1-1/4 lbs. (.56kg)
Air Inlet Thread NPT : 1/4"
Air Hose I.D. Size : 3/8" (10mm)
Avg. Air Consumption : 4 CFM
Air Pressure : 90-120psi
• Perfect for decals. Specialty tool also designed to quickly
remove pinstripes and double-face tape.
• Tough yet safe. Made to tackle difficult applications
without harming finish.
• 2 speed settings. Low settings for pinstripes and
high setting for everything else.
Low - Maximum 2,000 RPM for pinstripe removal
High - Maximum 4,000 RPM for double-sided tape and
decal removal
When unpacking, check the parts diagram and part number
listing on page 4 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
Unpacking
PRODUCT INFORMATION:
INTENDED USE OF THE TOOL
This is a specialty tool designed to be used for the removal of pinstripes,
adhesive, double-sided tape and moldings with MT1425EP Pads.
This tool includes a built-in regulator and has a maximum 4,000 RPM.
Do not use this tool outside of the designed intent. Never modify the tool
for any other purpose or use.
• Normal use of this product is likely to expose the user to
dust and/or microscopic particles containing chemicals known
to the State of California to cause cancer, birth defects or other
reproductive harm. Always wear appropriate safety equipment
and clothing when using this product. Study, understand and
follow all instructions provided with this product. Failure to
read and follow all warnings and operating instructions may
result in damages and serious injury or death.
• Always wear ANSI approved goggles when using this product.
(Users and Bystanders).
• Never use this tool for any application other than for which it
was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with accessories
not designed for it could result in serious injury or death.
• Always select the correct accessories of the correct size and
design for the job that you are attempting to perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin removal without assurance that vehicle is in
secure position and will not move during removal.
WARNING
MADE IN TAIWAN
MADE IN USA
1 YEAR LIMITED WARRANTY
The manufacturer warrants this product to the original user against defective
material or workmanship for a period of 1 year from the date of purchase.
The manufacturer reserves the right to determine whether the part or parts
failed because of defective material, workmanship or other causes. Failures
caused by accident, alteration or misuse are not covered by this warranty.
The manufacturer, at its discretion, will repair or replace product covered
under this warranty free of charge. Repairs or replacements of products
covered under this warranty are warranted for the remainder of the original
warranty period.
The manufacturer or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service represen-
tatives voids this warranty. The rights under this warranty are limited to the
original user and may not be transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some
states do not allow the exclusion or limitations of incidental or consequential
damages, so the above limitations may not apply to you.
MT1425K
1504059-14
Authorized Matco Repair Centers:
United States
Matco Air Tool Repair SV
1330 Commerce Drive
Stow, OH 44224
(800) 433-7098
NMG Industrial WTRC
Attn: South Dock
2223 S. Wilson Street
Tempe, AZ 85282
Canada
H. T. Pneumatic Rebuilders Inc.
22 Goodmark Place
Units 7 & 8
Toronto, Ontario M9W6R2