MPTL144IW 3/8" 14.4V IMPACT WRENCH WITH LED LIGHT
MPTL144IW
07/11/06
Standard Accessories
Charger
Battery
Blow Mold Carrying Case
1. Do not use tools in damp or wet locations.
Keep work area well lit and clean. Do not use
tools in the presence of flammable liquids or
gases.
2. Guard against electric shock. Avoid body
contact with grounded surfaces while
changing battery.
3. Store idle tools. When not in use, tool should
be stored in a dry locked place, out of reach
of children.
4. Do not force the tool. It works much safer at
the rate for which it was intended.
5. Do not abuse the cord. Never yank the
charger cord to disconnect it from the
socket. Keep the cord away from heat,
oil and sharp edges while changing the
battery.
6. Check for alignment of moving parts, binding
of moving parts, breakage of parts, mounting
and any other condition that may affect its
operation.
7. Any part that is damaged should be sent to
Tri-County Power Tool, Inc. or Pneutool
Parts & Services Co. Ltd. for repair.
8. To ensure the designed operational integrity
of these power tools, do not remove installed
cover or screws.
9. Do not wipe plastic parts with the following
solvents: gasoline, thinner, benzene,
carbon tetrachloride, alcohol, ammonia and
chlorinated cleaning solvents which may
damage and crack plastic parts. Instead, wipe
plastic parts with a soft cloth lightly
dampened with soapy water.
GENERAL OPERATIONAL PRECAUTIONS
MPT144C
MPT144B
RS2BOXB103
