AU SUPPORT 1800 237 425 WWW.MATCHMASTER.COM.AU | NZ SUPPORT 0800 237 425 WWW.MATCHMASTER.CO.NZPAGE | 1 OF 6
14MM-PR07
INSTRUCTION MANUAL
TABLE OF CONTENTS
1. INTRODUCTION
1. Introduction
1
1.1. Product Description
1
1.2. Typical Installation
1
1.3. Package Contents
1
1.4. Hardware Installation (217x165mm)
1
1.5. Mounting The Profiler Revolution
1
1.6. Configuring The Profiler Revolution
2
2. Technical Specifications
4
3. Block Diagram
4
4. Safety Instructions
5
5. Conditions Of Warranty
5
No part of this manual may be copied, reproduced, transmitted, transcribed
or translated into any language without permission. Matchmaster reserves the
right to change the specifications of the hardware and software described
in these manuals at any time. Matchmaster cannot be held liable for any
damages resulting from the use of this product. Specifications are subject to
change without notice. 10/19
1.1 Product description
The Johansson Profiler Revolution is an easy to use
programmable filter amplifier and converter for terrestrial
signals. The module optimizes terrestrial VHF/UHF and
FM signals from multiple inputs with the goal to provide
high quality images on your TV screen. The state-of-the-
art programmable filter amplifier has no equivalent on the
market due to its revolutionary technology:
• Can process more than 50 channels (32 filters)
• Can process S-Band output channels
• Can convert a wide selection of channels
• Sharpest filters on the market (>50dB on adjacent
channels)
• Real-time AGC on all individual filters
• Complete flexibility in assigning filters from any input.
Each channel can be frequency shifted to any other
channel in the VHF or UHF band (Flex Matrix)
• To avoid unauthorized persons changing the settings, all
Profiler products can be locked with a security code
• Made in Europe, for worldwide application
• 5 inputs: FM / 4 x VHF-UHF / >50 channels
/ AGC / 12-24 V remote power
• Product dimensions (H X W X D): 165mm x 217mm x 59mm
1.2 Typical installation
The Profiler Revolution can be used to provide high quality
television images and FM signals in a wide range of projects,
both in the hospitality as in the residential market. Typical
buildings or infrastructures where the Profiler Revolution
can be used include, but are not limited to:
• Large and small hotels, hostels, bed and breakfasts,
holiday parks
• Hospitals, nursing homes, prisons, settlements
• Large and small multi-dwelling units
1.3 Package contents
• 1 Profiler Revolution (ref. 14MM-PR07)
• 1 Power Adapter Cord (180cm)
1.4 Hardware installation (217x165mm)
1. 5 inputs: 4 VHF/UHF and 1 FM
2. Grounding clamp
3. Use the popular Johansson button to navigate through
the menu
4. Power suppy socket
6. Status LED
7. SD card slot for configuration input/copy
8. Output signal
9. Test port to control the output signal quality
1.5 Mounting the Profiler Revolution
• Important:
Mount the module
vertically to a wall in a well-
ventilated room and leave a
minimum space of 15 cm around
the product to guarantee maximum
ventilation of the product
• Connect an earth wire to the
grounding clamp
• Connect the power adapter cord to the power supply
socket. Check the status LED for the indication of DC
power presence
• Connect the VHF/UHF and/or FM inputs to the Profiler
Revolution
• Connect a coaxial cable to the output connector for
distribution of the signal
• Connect a network analyser to the test port to control the
signal quality
• Configure the Profiler Revolution using the rotary button,
see below
• Optionally: insert an SD card in the SD card slot to upload
the configurations of a previous module or to copy the
configuration to another module
1
2
4
5
9
8
7
6
3
