10100125 - A
© Matan Digital Printers Ltd
Page 5 of 19
9. Wait for a couple of minutes and then drain the liquid
through the drain hole, by unscrewing the drain plug
located on the bottom of the tank, as shown below.
Be careful not to lose the red gasket.
10. Repeat steps 7, 8 and 9, a couple of times (on the same
MIT).
11. Screw back the plug and fill the tank with approx. ½ liter of
alcohol.
12. Thoroughly wash the inside of the MIT
13. Open the plug (be careful not to lose the red gasket,) and
pour out the alcohol.
14. Dry the inside of the tank using an air line, as shown
below.
Drain Hole
