10100125 - A
© Matan Digital Printers Ltd
Page 4 of 19
6. Thoroughly clean the two threaded fittings, both inside and
out.
7. Pour approximately ½ liter of flushing fluid into the MIT
(Figure 2, page 4).
The flushing fluid must be compatible with the ink that is
being removed.
Be careful not to splash the liquid outside the tank and not
to turn it upside down, as it may damage the D
IGITAL
I
NK
L
EVEL
S
ENSOR
.
Figure 2:
Pouring flushing fluid into the MIT
8. Thoroughly wash the inside of the MIT, making sure that
the corners are free of any residual ink.
Plastic Fitting
Threaded Fittings
