Masung MS-FPT301, User Manual

Page: 26 / 34

26

Red paper end LED flash :paper end or paper near end.
DIP switch
Notice:Any DIP switch is reset, user should reload printer power, then
printer will be adjusted to the mode user wanted.
Switch
number
function ON OFF default
1 Black mark enable disable Off
2
Communication
port
Refer to table 1
On
3 Off
4 undefined none Off
5
Printing density Refer to table 2
Off(*)
6 Off(*)
7
Baud rate Refer to table 3
Off(*)
8 Off(*)
(*)printing density and baud rate are available to be set only when printer
is in serial port mode.
Table 1 communication port
Interface
DIP switch number
2 3
Undefined OFF OFF
Serial OFF ON