Page | - 1 -© Page | - 1 - © Copyright Mastip Technology Limited. Information subject to alteration. V2.0 www.mastip.com
Sequential Injection Controller SC8
1. Warranty
We warrant that this product will be free from defects in materials and workmanship for a period
of 18 months from the date of shipment. If any such product proves defective during this
warranty period, at our option, either will repair the defective product without charge for parts
and labour, or will provide a replacement in exchange for the defective product.
This warranty shall not apply to any defect, failure or damage caused by improper use or
improper or inadequate maintenance and care. We shall not be obligated to furnish service
under this warranty; a) to repair damage resulting from attempts by personnel other than our
representatives to repair or service the product; b) to repair damage resulting from improper
use or connection to incompatible equipment; or c) to service a product that has been modified or
integrated with other products when the effect of such modification or integration increases the
time or difficulty of servicing the product.
This warranty excludes replacement of fuses and damage to the product from the use of
improper fuses. The maximum allowable fuse rating is 3 amps
（
10 amps for DC24V/240W
output
）
. Lower ratings may be used for improved protection.
2. Safety
This product has been designed to be safe and simple to operate. As with any electronic
equipment, you must observe standard safety procedures to protect both yourself and the
equipment.
To Prevent Injuries:
do not apply voltage to a terminal that exceeds the range specified for that terminal.
do not operate this product when wet.
do not operate this product in an explosive atmosphere.
To Prevent Product Damage:
Do not operate this product from a power source that applies more than the voltage specified.
Do not operate this product from an injection signal input that mismatches the setting.
Do not operate this product from a solenoid valve where its power source mismatches the
gate output type setting.
3. Specifications
Power requirements: AC85~265V, 50/60Hz
