Masterwork Automodules Tech NC-3000 Series, Operation Manual, Page: 25 / 32

Maintaining NC-3000 25
Calibration
The sensors can be easily calibrated to ensure best performance:

Turn the unit off and on again.

While the initializing indicator is running, press the keys "Cur" and "Start"
together and hold until the display showing calibration menu.

Select the desired submenu.
a. Optical – to calibrate the IR sensors.
b. Motor –to calibrate the motor speed.
Calibration Menu

Optical calibration

Install the calibration paper (white slip) supplied with this manual and press
F3

NC-3000 Series calibrates the sensors automatically.

The display shows the result accordingly,
Any number of sensors = Repeat calibration
OK = Calibration done
On the process of calibration

Repeat step 2~3, until the display shows "OK",

After complete the calibration of white slip, install the black slip and repeat
the step 2~3 until the display shows "OK",

Once you completed the calibration, just turn the unit off, NC-3000 Series
runs in normal mode the next time you turn it on.
Optical Calibration Failure Optical Calibration Success

Motor Calibration