Masterwork Automodules Tech NC-3000 Series, Operation Manual, Page: 20 / 32

20 Masterwork Automodules Tech Corp Ltd

Switch On mode
To toggle between the factory default and the last setting start up mode.

Print Paper
To setup a papel size of the connected thermal printer.
(Default: W(79.5))

Highlight the icon Switch On Mode.

Confirm Selection with
the
" (Enter)"
.

Use the “ ” and “ ” to toggle a desired setting.

Default: Settings: set to the factory defalut
settings
Detection - On. Add - On. Batch - Off. (Count
mode.) Auto - On.

Turn off Status: keep the last settings for the
next restart.

Confirm setting.

Press the (Enter) to confirm setting and
go back to upper layer.

Highlight the icon Print Paper.

Confirm Selection with
the
" (Enter)"
..

Check the paper size of the connected thermal
printer.

W57.5: 2 inches paper.

W78.5: 3 inches paper.

Select the paper size of the connected thermal
printer.

Use the “ ” and “ ” to toggle a desired
setting

Confirm setting.

Press the to confirm setting and go back
to upper layer.