Rev 00.00
Page 23 of 32
reproduction of this manual, even partial, is forbidden.
MACHINE MAINTENANCE
Par
Description
3
Detail of carbon filter for MW 1900
FOURTH FILTRATION STAGE (OPTIONAL)
Active carbon filter
Filter code: S.1702-CS
Dimension
mm
292x648
Carbon type
Vegetal, in
cylinders
Regenerability
No
Disposal
T
he activated carbon are materials, made predominantly of carbon in the
form of microcrystals of graphite, treated so as to obtain a porous structure
with a large internal surface area. Thanks to these characteristics they have
high capacity adsorbent and are able to absorb, during the contact phase,
many types of substances, attracting the molecules in their inner surface.
The absorbent capacity of the filter is given by the types of pollutants and
from their combination.
* The fourth filtration stage is only with the Active Carbon Kit, when not present, as in the standard version,
there is a
polyester
microfiber panel in order to reduce noise emission.
Carbon filters are made with inert materials which, if they are not contaminated with toxic-noxious substances deriving
from their use, can be disposed of as solid urban waste.
It is recommended to clean this filter at least once a year
for maximum efficiency of the machine.
For the replacement of
carbon filters, unscrew the
side vents on the sides, on
which are threaded, as
shown
above.
You have to pull out the
old filter from the grill then
insert the new one.
MW 1900 WELDING FUME EXTRACTOR
Masterweld | 2018 all rights reserved
