Rev 00.00
Page 4 of 32
reproduction of this manual, even partial, is forbidden.
INTRODUCTION
Par
Description
1
Scope of the operating and maintenance manual
This instruction manual is an integral part of the machine and has the purpose of providing all the necessary
information for the following purposes:
•
Raise the awareness of operators as regards safety matters;
•
Safe handling of the machine when packaged and unpackaged;
•
Correct installation of the machine;
•
Thorough knowledge of the machine’s operations and limits;
•
Correct use in total safety;
•
Correct and safe maintenance;
•
Dismantling of the machine in total safety, in compliance with the regulations in force on the health
and safety of workers and the environment.
The people in charge of the company’s departments in which this machine will be installed must,
according to the regulations in force, carefully read the content of this Operating Manual and ensure
that operators and maintenance staff operating and working on the machine read the relevant parts.
The time dedicated to this will be fully rewarded by the correct and safe operation of the machine.
This document is based on the assumption that the systems in which the machine is to be installed are in
compliance with the health and safety at work regulations in force.
The instructions, drawings and documentation contained in this Manual are of a technical confidential nature
and are property of the manufacturer; they may not be reproduced in any way, in part of fully.
If this manual is amended by the manufacturer, the Customer has the responsibility of ensuring that only the
updated versions are available in the points of use.
MW 1900 WELDING FUME EXTRACTOR
Masterweld | 2018 all rights reserved
