Mastervolt SCM20 PWM, Installation Manual, Page: 7 / 16

EN / SCM20 & SCM40 PWM User’s Manual
7
Screen Meaning
(#) Battery type.
See section 2.6 to change
the Battery type settings
(!) Voltage at the Load
output.
(!) Load current.
(#)(!) Discharged Ah from the
battery.
(#)(!)Total discharged Ah
from the battery.
(#)(!) Status of the load
mode.
See section 2.6 for
explanation and
configuration of the Load
mode settings
2.6 CONFIGURATION
CAUTION!
Invalid settings of the Solar ChargeMaster can
cause serious damage to your batteries and/or
the connected load! Adjustments of settings may
be undertaken by authorised personnel only.
If your Solar Chargemaster is not new, you have
to take into account that former users may have
changed the settings.
When the symbol is shown on the screen (see section
2.5), you can enter the Configuration mode:

Hold
MENU
pressed for 1 sec. until the symbol starts
blinking
Change a setting:

Shortly press
OK
until the desired setting is shown
Save setting and exit the configuration mode:

Press
MENU
shortly
Exit the Configuration mode without saving setting:

Wait for 30 seconds.