15
MAINTENANCE
WARNING!
ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE REMOVING THE
POWER HEAD FROM THE CONTAINER.
WET/DRY VACUUM WITH TWO-STAGE MOTOR - 054-0241-8
1
2
3
4
5
1. Check that the power cord is disconnected from the outlet. (Fig. 1)
2. Disconnect the hose from the vacuum. (Fig. 2)
3. Remove the vacuum from the mounting rack.
4. Undo the latches and remove the power head from the container. (Fig. 3)
5. Clear all dirt and debris from the container and hose. (Fig. 4)
6. Clean the foam filter by washing it with water and mild soap. (Fig. 5)
7. Check the hose, attachments, and power cord to ensure that they have not been damaged.
IMPORTANT!
Clean or change the cartridge filter regularly for best performance. ALWAYS USE
CARTRIDGE FILTER FOR DRY VACUUMING. If the machine is used without the cartridge filter, the motor
will burn out and the warranty will be voided. Always keep spare filters on hand.
NOTICE!
The filters included are made of high quality materials designed to stop small dust particles.
The cartridge filter should be used for dry pick-up and small amounts of liquids. A dry cartridge filter is
necessary to pick up dust. If the cartridge filter is wet, it will clog quickly and be difficult to clean. Handle
the filter carefully when removing it for cleaning and replacing. Check the filters for tears or small holes,
a small hole can let dust pass through and out of the cleaner. Do not use a filter with holes or tears in it,
replace it immediately.
