11
WARNING!
BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION ENTITLED
‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE
GASES, VAPOURS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPOURS
INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-BASED
PAINTS, GASOLINE, ALCOHOL, AND AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE BUT ARE
NOT LIMITED TO: COAL, MAGNESIUM, GRAIN, AND GUN POWDER. TO REDUCE THE RISK OF
HEALTH HAZARDS FROM VAPOURS OR DUST, DO NOT VACUUM TOXIC MATERIALS.
WET/DRY VACUUM WITH TWO-STAGE MOTOR - 054-0241-8
DRY VACUUM OPERATION
ON
OFF
1
2
3
4
6
5
7
8
9
1. Verify that the power cord is disconnected from the outlet. (Fig. 1)
2. In order to prepare your vacuum for dry vacuuming, verify that the cartridge filter is securely mounted.
Make sure the filter is pushed in until it stops against the power head. (Fig. 2) (Your Wet/Dry Vac
comes with the cartridge filter pre-installed. If not, see page 13 for installation instructions.)
3. Place filter retainer on top of cartridge filter and tighten down by turning the retainer handle clockwise.
(Fig. 3)
4. Place the power head back on the container, aligning the top section with the latches, and snap into
place. (Fig. 4)
OPERATING INSTRUCTIONS: DRY VACUUMING
5. Insert the locking end of the hose onto the vacuum port on the tank and lock in place. Push the
required attachment onto the free end of the hose or extension. (Fig. 5)
6. Plug the power cord into the outlet and hang the vacuum onto the rack or use off the rack. (Fig. 6)
7. Turn the motor on by flipping the switch to the ‘I’ ON position. (Fig. 7) For remote control use, set the
power switch to remote control position “ ” and turn the vacuum on by pressing the ‘I’ ON button
on the remote control handle for at least one second. (Figs. 8 & 9)
8. Once you have completed vacuuming, flip the switch to the ‘O’ OFF position or press the ‘O’ OFF
button on the remote control for at least one second.
O = OFF I = ON = Remote control
DO NOT USE THE CARTRIDGE FILTER FOR LIQUID VACUUMING.