Step 7B: Installing the Rear Window
to the Top Deck
Locate the rear window and line up and slide the rear win-
dow into the “C” Channel located at the top of the rear
portion of the top deck (FIGs 44, 45 & 46).
Once both quarter windows are secured to the top deck,
line up the driver’s side rear zipper on the quarter window
and on the rear window and zip it down a few inches
(FIG 47). Repeat this on the passenger side of the rear
window.
You may have to lift the quarter window up to secure this
second zipper. Once both side zippers are secure, zip the
rear window zippers down about half way (Fig 48). You
will close these zippers completely at the end of step 10.
6
FIG44
FIG45
FIG47
SkyMaster Assembly for Wrangler
FIG46
FIG48
When removing the quarter and rear windows from the Top deck be sure to slide them out completely before pulling
down. Dis-engage the side hook and loop before sliding the windows out. DO NOT “Peel” the windows out!
Failure to completely disengage the windows from the “C” Channel will damage the Top and quarter window!
There may be times when the “P” extrusion may come out of the “C” Channel ends due to extreme downward
pressure. This is normal. If this occurs, slide the “P” extrusion out of the C channel and re-install securing the
window back into the “C” Channel.
Each Time you remove the windows:
Completely pull the windows out of the “C” Channel
before pulling the windows down!
Do not “Peel” the windows out.
FIG48
MT_TJ_SKYMASTER_TOP_LTR.qxp_Layout 1 3/27/20 2:54 PM Page 6