5
NOTE:
In the main pictures of this product you will see the rear strap
running down the roll bar as shown in FIG 19. This was an old design that
has been improved to prevent “flapping”. The correct attachment is shown
in FIG’s 16 and 17 above.
This strap location is
incorrect
.
See FIG’s 16 and 17 above for
correct attachment
Installation & Use of Mesh with Your Hardtop Freedom Panels:
Route the side straps, shown in the square in FIG
20, toward the rear door between the hard top and
sport bar. It then wraps inside the pillar to tighten
the mesh.
Removal or Reinstallation of Freedom Panels:
To remove or re-install your hard freedom panels,
undo the hook and loop on the Rectangle loop and strap installed on the sound bar in step #2 to put your
hand behind the mesh (Fig 21 & 22). Lock the latches and reinstall the hook and loop on the sound bar strap.
Repeat on the other side.
Working with Freedom Panel Front Latches:
The front latches can be installed by slipping your hand under the mesh near the front corner of the top (FIGs
23 & 24) and then latch the front Freedom panel latches. Repeat on the other side of the top.