FIG 27
Step 10: Installing the
R
ear
M
ain
B
racket to the
V
ehicle
7
On the rear sport bar, pull off the plastic bracket
that comes with the jeep, there is two metal clips
that hold it in place (Fig 27).
Line up the rear main bracket over the holes (Fig
28). Insert the M6 screws and using the included
5mm Allen head tool, tighten the bracket in place
(Fig 29).
FIG 28
Make sure the pin secure the rear leg as shown in
fig 30 & 31.
FIG 29
FIG 30
Pin securing leg
FIG 31
Step 11: Installing the rear bow with leg to the main bracket
FIG 32
FIG 33
In the Driver’s side rear main bracket, there is
a screw and nut installed for shipping (fig 32).
Remove this screw and nut, and set aside. Place
the Driver rear leg to the main rear bracket (fig 33
& 34).
Nut & Screw
Make sure the holes of the rear leg and main
bracket line up (fig 34). Insert the screw and nut
previously removed using a 10mm socket and the
included 4mm Allen head tool. Tighten and secure
the bracket (fig 35).
Rear Bow #
4
Rear Leg
FIG 34
FIG 35
Repeat this procedure on the passenger side.
Repeat this procedure on the other side of the
vehicle