3
FIG 2
Step 2: Rear Over Door Surround Assembly
Passenger
side Pillar
Assembly
Driver
side Pillar
Assembly
Passenger side
Rear Over-Door
Assembly
4mm Allen
Wrench
FIG 3
FIG 5
Passenger Front door surround
Driver Front door surround
Driver side Rear Over-Door
Assembly
Locate the assembled Driver’s side rear door sur-
round (Fig 6).
On the bottom of the vertical pillar portion of the
assembled door surround are two pins as shown
in FIG 7 that will be inserted into the body tub.
Step 3: Install Rear Door Surrounds to Jeep
FIG 6
FIG 8
Insert this pin into the body tub as shown in FIG’s
8 & 9.
Repeat this procedure on the passenger side rear
door surround.
FIG 9
FIG 7
FIG 4
Rubber
Seal
Locate the driver’s side rear over door assembly,
the driver’s side Pillar assembly
, The Rubber seal
and the
4mm
Allen head
wrench
(Fig 2).
O
n the driver’s side rear over door assembly,
there
are
two
screws
installed for shipping (
Fi
g 3).
Remove
th
e
s
e
screws and set aside
.
Place the
rubber seal on the driver’s side pillar assembly
(Fig 3A)
Line up the Driver side pillar assembly
and the driver side
rear over door assembly as
shown in fig 4. Insert
the screws and tighten using
the included 4mm
Allen wrench securing the two
pieces (fig 5).
Repeat the above assembly on the passenger
side rear over door and pillar assemblies.
FIG 3
A