MasterPower Beta-20K, Installation And Operation Manual, Page: 23 / 31

Below is the setting range for User-Def. You may change the limit manually by using
this function.
Press the UP/DOWN keys to scroll through items. Press the ENTER key to edit the
highlighted item. Press the UP/DOWN key again to change the setting. Press the
ENTER key to save the setting. Press the ESC key to cancel the change and return
to the previous menu.
NOTE:
The initial value of the User-Def standard are for reference only. It does
not represents the correct value suitable for use.
Figure 7.26 Save / cancel
Save/Cancel
2015-02-23 19 35
Save & Send
Cancel & Exit
YES=<ENT> NO=<ESC>
7. General Operation
7. General Operation
This function is used to start or stop the generation of the inverter (see Figure 7.27).
Press the DOWN key to move the cursor, Press the UP key to revise the value.
Press the ENTER key to execute the setting.
Press the ESC key to return to the previous menu.
Figure 7.27 Set Grid ON/OFF
7.5.2 Grid ON/OFF
7.5.3 Power Setting
Active and reactive power can be set through power setting button.
Figure 7.28 Power setting
Grid ON/OFF
2015-02-23 19 35
Grid ON
Grid OFF
YES=<ENT> NO=<ESC>
Power Control
2015-02-23 19 35
Output Power Control
Reactive Power Control
Output Power Cortrol With Restore
Reactive Power Control With Restore
.40. .41.
OV-2G3-6V--1-:3 35V OV-G-F1: 50.2-53Hz(60.2-63Hz)
OV- G -0
V. 1 1 -- -T-:9 s
OV-G-F1-T: 0.1---9s
OV-2G4 - 8V - - 2- : 3 4 1 V
OV-G-F2: 51-53Hz(61-63Hz)
OV- G -0 V. 1 2 -- -T-:1 s
UN-1G7 - 3 V - -1 -: 2 3 6 V
OV-G-F2-T: 0.1---9s
UN-G-F1: 47-49.5Hz(57-59.5Hz)
UN- G -0 V . 1 1 -- -T-:9 s
UN-1G3 - 2V - -2 -: 2 1 9 V
UN-G-F1-T: 0.1---9s
UN-G-F2: 47-49Hz(57-59Hz)
UN- G -0 V . 1 2 -- -T-:1 s
UN-G-F2-T: 0.1---9s