background image

Page 6 

A battery can produce a short circuit 

current high enough to weld a ring to 

metal, causing a severe burn.

2.6 

Never smoke or allow a spark or flame 

in the vicinity of the battery or engine. 

2.7  This product contains a lithium ion 

battery.

 In case of fire, you may use 

water, a foam extinguisher, Halon, CO

2

ABC dry chemical, powdered graph-

ite, copper powder or soda (sodium 

carbonate) to extinguish the fire. Once 

the fire is extinguished, douse the 

product with water, an aqueous-based 

extinguishing agent, or other nonalco-

holic liquids to cool the product and 

prevent the battery from re-igniting. 

NEVER attempt to pick up or move a 

hot, smoking, or burning product, as 

you may be injured. 

2.8  NOTE:

 This equipment has been 

tested and found to comply with the 

limits for a Class B digital device, 

pursuant to part 15 of the FCC 

Rules. These limits are designed 

to provide reasonable protection 

against harmful interference in a res-

idential installation. This equipment 

generates, uses, and can radiate 

radio frequency energy and, if not 

installed and used in accordance 

with the instructions, may cause 

harmful interference to radio com-

munications. However, there is no 

guarantee that interference will not 

occur in a particular installation. If 

this equipment does cause harmful 

interference to radio or television 

reception, which can be determined 

by turning the equipment off and on, 

the user is encouraged to try to cor-

rect the interference by one or more 

of the following measures:
•  Reorient or relocate the receiving 

antenna.

•  Increase the separation between 

the equipment and receiver.

•  Connect the equipment into an 

outlet on a circuit different from 

that to which the receiver is con-

nected.

•  Consult the dealer or an experi-

enced radio/TV technician for help.

3. FEATURES

Battery clamps

Micro-USB 

charging port

Ready/Fail LED

Battery status/

Light button

Battery status 

indicators

Built-in work light

USB port

ON/OFF  

Power switch

Summary of Contents for 260-9516













Reviews: