2
3
TABLE OF CONTENTS
Specifications .................................................................................................Page 2
Rules for Safe Operation ..............................................................................Page 3
Description ......................................................................................................Page 8
Assembly & Adjustments..............................................................................Page 9
Operation .........................................................................................................Page 11
Accessories ....................................................................................................Page 12
Maintenance...................................................................................................Page 12
Warranty ..........................................................................................................Page 13
SPECIFICATIONS
Rating
120 V 60Hz
Motor
12.5 A
No load Speed
6000 RPM
Wheel diameter
7”
Arbor size
5/8”-11 UNC
Cord length
8’
Weight:
10 lb 6 oz
SAFETY SYMBOLS FOR YOUR TOOL
The label on your tool may include the following symbols.
V...............................................................Volts
A...............................................................Amps
Hz.............................................................Hertz
W..............................................................Watts
min...........................................................Minutes
...........................................................Alternating Current
............................................................Direct Current
n
o
...........................................................No-load Speed
............................................................Class II construction
.../min.......................................................Revolutions or Strokes per minute
.................................................... Indicates danger, warning caution. It means
attention! Your safety is involved.
RULES FOR SAFE OPERATION
KNOW THE TOOL
Read this operating manual and all the labels affixed to the angle grinder
carefully before using this tool. Keep this manual available for future
reference.
IMPORTANT
This tool should only be serviced by a qualified service technician.
READ ALL INSTRUCTIONS THOROUGHLY
GENERAL SAFETY RULES FOR ALL POWER TOOLS
WARNING!Read and understand all instructions.
Failure to follow all in-
structions listed below may result in electric shock, fire and/or serious per-
sonal injury.
SAVE THESE INSTRUCTIONS
Work Area
Keep your work area clean and well lit.
Cluttered benches and dark
areas invite accidents.
Do not operate power tools in explosive envirnments
,
such as in the
presence of flammable liquids, gases, or dust.
Power tools create sparks
which may ignite the dust or fumes.
Keep bystanders, children, and visitors away
while operating a power
tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
Double insulated tools are equipped with a polarized plug (one blade
is wider than the other.) This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician
to install a polarized outlet. Do not change the
plug in any way.
Double insulation eliminates
the need for the three wire grounded power cord
and grounded power supply system.
Avoid body contact with grounded surfaces such
as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your
body is grounded.
120V
~ 60
Hz
Summary of Contents for 241-0781
Page 8: ...14...
