background image

12

13

 WARNING! 

Excessive or sudden pressure on the wheel will slow grinding 

action and put dangerous stresses on the wheel.

When grinding with a new wheel, be certain to grind while pulling tool 

backwards until wheel becomes rounded on its edge. New wheels have 

sharp corners which tend to “bite” or cut into workpiece when pushing 

forward.

ACCESSORIES

Spanner 1pc

Side handle 1pc

Safety guard 1pc

Metal grinding disc 1pc

Stone grinding disc 1pc

MAINTENANCE

Before each use, inspect the grinder, switch and cord for damage. Check 

for damaged, missing, or worn parts. Check for loose screws, misalignment 

or binding of moving parts, or any other conditions that may affect the 

operation. If abnormal vibration or noise occurs, turn the tool off immediately 

and have the problem corrected before further use.

Before cleaning or performing any maintenance, the tool should be 

unplugged from the power supply. Using compressed air may be the most 

effective cleaning method. Always wear safety goggles when cleaning tools 

with compressed air.

The brushes and commutator in your tool have been engineered for many 

hours of dependable service. To maintain peak efficiency of the motor, we 

recommend the brushes be examined every two to six months.

 WARNING! 

Do not let brake fluids, gasoline, petroleum-based products, 

penetrating oil, etc., come in contact with plastic parts. They contain chemi-

cals that can damage, weaken or destroy plastic.

 WARNING! 

When servicing use only identical replacement parts. Use of 

any other parts may create a hazard or cause product damage.

 WARNING! 

Check extension cords before each use. If damaged replace 

immediately. Never use tool with a damaged cord.

 WARNING! 

To ensure safety and reliability, all repairs should be performed 

by a qualified service technician.

WARRANTY

If, during normal use, this MASTERFORCE™ power tool breaks or fails due 

to a defect in material  or workmanship  within three years from the date of 

original purchase, simply bring this tool and its sales receipt back to your 

nearest Menards

®

 retail store for a free equivalent replacement within those 

three years. 
The warranty: 
(1)  excludes expendable parts including but not limited to blades, bits, light 

bulbs, and/or batteries;

(2)  shall be void if this tool is used for commercial or/and rental purposes; 

and 

(3)  does not cover any losses, injuries to persons/properties, or costs. This 

warranty does give you specific legal rights and you may have other 

rights, which vary from state to state.

Summary of Contents for 241-0781









Reviews: