19
WARNING:
Always unplug the saw before making any adjustments. Fail-
ure to unplug the saw could result in accidental starting, which can cause
serious personal injury.
1.
Unplug the saw from
the power source.
2.
Position the edge
guide so that the ruler
side of the arm is
facing up. Slide the
arm of the edge guide
through the mounting
slots at the front of the
saw base (Fig 13).
3.
Adjust the edge guide
to the desired width
of cut.
4.
Tighten the edge-guide lock knob.
When using the edge guide, position the face of the edge guide firmly against
the edge of the workpiece. This will help to make a true cut without binding
the blade. The edge of the workpiece must be straight for the cut to be
straight. Use caution to prevent the blade from binding in the cut.
SETTING THE BEVEL ANGLE
WARNING:
Always unplug the saw before making any adjustments. Fail-
ure to unplug the saw could result in accidental starting, which can cause
serious personal injury.
1.
Unplug the saw.
2.
Loosen bevel
adjustment lever (Fig.14).
3.
Raise the motor-
housing end of the saw
until the desired angle
setting is indicated on
the bevel scale.
4.
Tighten the bevel
adjustment lever
securely.
Fig. 14
Bevel Pointer
Bevel Adjustment Lever
Fig. 13
Edge Guide
