MasterForce 241-0313, Operator'S Manual

Page: 13 / 20

Page 12
OPERATION
NOTICE: when adjusting the torque clutch
make sure that the speed switch is either
completely in the LO or HI position.
CAUTION:
Do not change the
torque setting when the tool is running.
DRILL MODE (fIG. 7)
Select drill mode for drilling and other
heavy-duty applications.
To select drill mode, rotate the torque
adjustment ring until the icon aligns with the
torque indicator and clicks into position.
LED WORkLIGHT (fIG. 8)
The LED worklight, located on the front
of the drill/driver, will illuminate when the
trigger switch is depressed. This provides
additional light on the surface of the
workpiece for operation in lower-light
areas. The LED worklight will turn off when
the trigger switch is released.
INSTALLING bITS (fIG. 9a–9b)
1. Lock the trigger switch by placing the
direction of rotation selector in the
OFF (center) position.
2. Open or close the chuck jaws to a
point where the opening is slightly
larger than the bit size you intend to
use.
3. Insert a drill bit.
17
FIG. 7
Torque indicator
Drill icon
LED worklight
Drill bit
FIG. 8
FIG. 9a
FIG. 9b