Masterflex I/P 77600-82 Operating Manual Download Page 7

OPERATING MANUAL 

      

ASSEMBLED BY:   

 

A-1299-5136 

Page 7 of 8                                     Printed in USA                               

Edition 03 

 

 

(US and Canada) Toll Free 1-800-MASTERFLEX 

 1-800-637-3739 

(Outside US and Canada) 1-847-549-7600 

 1-847-381-7050 

www.masterflex.com 

 [email protected] 

          Operating‡ 

3.7 in x 3.5 in x 3.0 in (94 mm x 89 mm x 76 mm) 

          Open 

4.5 in x 3.5 in x 5.1 in (114 mm x 89 mm x 130 mm) 

Weight 

2.1 lb (0.96 kg) 

Noise Level 

<70 dBA @ 1 meter 

Compliance (for CE mark) 

EN809 (EU Machine Directive) 

 
*   As tested with NORPRENE®, PHARMED® BPT® and TYGON® tubing. 
    Values will be less with silicone and C-FLEX. 
 
** L/S® 15HP and L/S® 16HP tubing are only for use with the MASTERFLEX® L/S® High-Performance Pump 
    Head and any MASTERFLEX® L/S® 1 to 100 rpm drive capable of running two or more pump heads. 
 
‡  Use this temperature range for continuous duty operation with no decrease in performance or product life. 
    Pump Heads will work outside this range with some possible reductions in performance or product life. 

WARRANTY 
Use only MASTERFLEX precision tubing with MASTERFLEX pumps to ensure optimum performance. 
Use of other tubing may void applicable warranties. 
 
This product is warranted against defects in material or workmanship, and at the option of the manufacturer or 
distributor, any defective product will be repaired or replaced at no charge, or the purchase price will be 
refunded to the purchaser, provided that: (a) the warranty claim is made in writing within the period of time 
specified on this warranty card, (b) proof of purchase by bill of sale or receipted invoice is submitted 
concurrently with the claim and shows that the product is within the applicable warranty period, and (c) the 
purchaser complies with procedures for returns set forth in the general terms and conditions contained in the 
manufacturer's or distributor's most recent catalog. 
This warranty shall not apply to: (a) defects or damage resulting from: (i) misuse of the product, (ii) use of the 
product in other than its normal and customary manner, (iii) accident or neglect, (iv) improper testing, operation, 
maintenance, service, repair, installation, or storage, (v) unauthorized alteration or modification, or (b) post-
expiration dated materials. 
 
THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER, AND THE MANUFACTURER AND 
DISTRIBUTOR DISCLAIM ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY, 
INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE. NO EMPLOYEE, AGENT, OR REPRESENTATIVE OF THE MANUFACTURER OR 
DISTRIBUTOR IS AUTHORIZED TO BIND THE MANUFACTURER OR DISTRIBUTOR TO ANY OTHER 
WARRANTY. IN NO EVENT SHALL THE MANUFACTURER OR DISTRIBUTOR BE LIABLE FOR 
INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES. 

 
THE WARRANTY PERIOD FOR THIS PRODUCT IS TWO (2) YEARS FROM THE DATE OF PURCHASE. 

 
 
 
 
 
 
PRODUCT RETURN 

Summary of Contents for I/P 77600-82









Reviews: