OPERATING MANUAL
ASSEMBLED BY:
A-1299-5136
Page 4 of 8 Printed in USA
Edition 03
(US and Canada) Toll Free 1-800-MASTERFLEX
•
1-800-637-3739
(Outside US and Canada) 1-847-549-7600
•
1-847-381-7050
www.masterflex.com
•
Loading Tubing
WARNING:
Turn off drive before removing or installing tubing. Fingers or loose clothing
could be caught in the rollers.
1.
Rotate the tubing retainer knob, Figure 2, counterclockwise to release the retainer, then pull to open the
cover.
2.
Lift the latch to open the occlusion bed.
3.
Insert the MASTERFLEX tubing inside the tubing guide and around the rotor with the ends of the tubing
extending out of the tubing entrance and tubing exit as shown in Figure 3. Center the tubing on the roller.
4.
Press the occlusion bed against the tubing, and snap the latch closed.
5.
Close the cover, then pull the tubing snug (do not stretch) around the rotor assembly.
6.
Tighten the tubing retainer by rotating the tubing retainer knob clockwise sufficiently to prevent the tube
from moving.
7.
Start the drive. Let the pump rotor turn at least one revolution to break in the tubing, before turning off the
drive.
8.
Unlatch the bed from slot 1, and relatch it using slot 2. Pump is now ready for operation.
