9
lasEr DistancE FinDEr/mEasurinG tool - 057-4585-0
10
lasEr DistancE FinDEr/mEasurinG tool - 057-4585-0
Become familiar with the laser distance finder/measuring tool.
Before attempting to use this laser distance finder/measuring tool, become familiar with all of
its operating features and safety requirements.
LCD display
large lcD screen with white backlighting helps makes it easy to read the large numeral
measuring data clearly, even in dark conditions.
Full battery indicator
Empty battery indicator
indicates that the measurement is taken from the positioning pin
indicates that the measurement is taken from the bottom of the tool
indicates that the measurement is taken from the position of the tripod screw
indicates that the measurement is taken from the front of the tool
laser beam indicator
single-distance measurement
area measurement
Volume measurement
single Pythagorean theorem measurement
Double Pythagorean theorem measurement
minimum measurement indicator
maximum measurement indicator
continuous measurement indicator
keyboard function
(fig 1)
For operation, please see the references
to the specific functions and computations
later in this manual.
1. Power key - turns on/off the tool.
2. measure key - turns on the laser and
takes measurements; activates the
continuous measurement.
3. clear key - clears the measurements;
reverts to single-distance measurement
mode.
4. mode key - changes the measuring mode among: area, volume, single Pythagorean theorem,
double Pythagorean theorem, and single-distance measurement modes.
5. Plus/minus key - For addition or subtraction of measurements.
6. measuring reference point - switches the measuring reference among: the rear of the tool,
the position of the tripod screw, the front of the tool, and the positioning pin.
7. unit conversion key
8. max/min key - activates the maximum or minimum measuring mode.
To install batteries
(fig 2)
this laser distance finder/measuring tool
uses four “aaa” batteries.
1. Push the hook to open the battery cover.
2. insert four new “aaa” alkaline batteries
according to the polarity indicators in the
battery compartment. Be sure the polarity
(+/-) is correct!
3. close the cover and lock it securely in place.
NOTE:
• replace the batteries when the battery
indicator shows empty.
• remove the batteries from the laser distance finder/measuring tool when not using it for
extended periods.
• the 4 aaa batteries should match each other in brand and type.
• Do not mix old and new batteries.
• remove dead batteries immediately and dispose of them according to your local ordinance.
never dispose of batteries in fire.
OPERA
TING INSTR
UCTIONS
OPERA
TING INSTR
UCTIONS
1
2
3
4
5
7
8
6
fig 1
fig 2